Trucking - OTR Bypass Filter Applications

 

 

trucking1 trucking2

Bypass oil filtration technology was originally introduced to the trucking industry in the 1930's. It was the exclusive means for filtering engine oil from the early 1930's until the early 1960's. At that time, engine manufactures moved away from bypass filtration when full flow filtration became vogue. People saw full flow as having the ability to filter all the oil at once as opposed to the 10% at a time that bypass filtration does even though full flow filters don't have the ability to filter out anything but the largest particles out of the oil. Factory full flow oil filters are not even designed to purify the oil down to a single digit micron level but mainly to filter all the oil at a high rate before it gets to the engine. Since full flow filters filter the oil at such a high flow rate, it is unable to trap the microscopic particles that enter the oil and which can damage your motor. During the last 10 years bypass filtration interest has been resparked and has been positioned mainly as a way for fleets to extend engine oil life and oil drain intervals. People now realize you can have the best of both worlds by running bypass filtration along side your full flow filter. This allows the full flow filter to catch the large particles and the Kleenoil Bypass Filtration System to to catch particles down to 1-micron in size, all the water and acid, as well as the soot that will inevitably end up in diesel engine oil.

Kleenoil Bypass Filtration Systems can help prevent a buildup of contaminants that can score bearings, rings and cylinder walls of the expensive engines in your truck fleet. Contamination also can contribute to an increase in viscosity and gum deposits on rings and valves. Because filtration is necessary for effective engine protection, it is important to make sure you have the best available system in good working order. According to Fleet Equipment Magazine, 60 percent of the potential causes of wear and failure can be eliminated by well-designed and properly applied filtration systems.

Kleenoil Bypass Filtration Systems are especially beneficial on the newer EGR (exhaust gas recirculation) diesel engines as they will run hotter and produce more soot and acids than previous models of diesel engines. The very nature of how these newer EGR engines function makes Kleenoil Bypass filtration a must have on these newer trucks! Most engine builders have decided that cooled EGR is the most effective way to reduce combustion temperatures. Small amounts of exhaust gas will be piped to the chambers to displace oxygen; less oxygen means cooler combustion. Before going to the cylinders, some of the exhaust gas heat will be absorbed by the engine's coolant, thus the term “cooled EGR." Federal rules now require diesel engines to produce about 50% less nitrous oxide, or NOx, than current diesels thus the reason for the newer EGR diesel motors. More heat, soot and acid will form during combustion in most of these new EGR diesels, say engineers. With greater amounts of soot and acid making it's way into the engine oil, the Kleenoil Bypass Filter is no longer considered an optional item. It is a must have if you want to reduce operational costs and maximize the life of these expensive engines!


Key Benefits of Kleenoil Bypass Filter Systems for Trucking or Fleet Applications

  • Extended oil drain intervals.
  • Reduced new oil purchases.
  • Better maintained oil viscosity.
  • Decreased sludge and varnish deposits.
  • Reduce operational costs.
  • Extend depreciation costs.
  • Reducing oil disposal fees.
  • Keeping your equipment and vehicles on the job sites longer!
  • Enhancing our environmental commitment and awareness.
  • Improving daily vehicle availability through scheduled maintenance.
  • Reducing unscheduled service breakdowns and costly repairs!
  • Freeing up technicians to perform other important service tasks!
  • Virtually eliminate engine wear.
  • Remove 99.95% of all water from your oil.
  • Remove's all wear causing particles down to 1-micron in size.
  • Reduce time needed for service...those 1 hour oil changes become 5 minute filter changes!
  • Does NOT remove additive package components in oil.

Recommendations for Use

Kleenoil Bypass Filter Systems can be a valuable addition for trucking or fleet applications if:

  • You put a large amount of miles/hours on your trucks or fleet equipment annually.
  • You would like to save a large amount of money on oil changes through extended oil drain intervals. You could save as much as 90% over your previous oil maintenance schedule.
  • Equipment downtime is simply not an option.
  • You simply want the ultimate in protection for your equipment and want to maximize the life of the engine, hydraulic systems, or transmissions.

Trucking Oil Analysis Sample Reports