Kleenoil Mobile Filtration Carts

Kleenoil Mobile Filtration Carts are free-standing off-line fluid cleaning rigs.

The Kleenoil Mobile Filtration Carts comes available in three iterations:

110V
220V
Air Powered (compressor)

The Kleenoil Mobile Filtration Unit is a robust, designed to last, free-standing, electric off-line fluid cleaning rig and can be used as multi-purpose fluid cleaning and transfer machines.

Ideal for cleaning most hydraulic, gear, and transmission fluid reservoirs, and, because of its portable design, it can be used for fuel tank purging on trucks, construction equipment, and boats as well as for oil and fuel transfer and rotational cleaning of factory and industrial equipment.

The system can also be used to clean and transfer unused oil (ISO 14/9) prior to use.

A simple, affordable ‘plug and play’ filtration cart in varying configurations to bring your mineral oils & diesel fuels to ‘cleaner than new’.

Designed for cleaning hydraulic, gear and transmission fluid reservoirs and, as a portable design, ideal for fuel tank purging on trucks, construction equipment, and boats or for oil and fuel transfer and rotational cleaning of factory and industrial equipment.
The Kleenoil filter achieves an ISO 4406 Cleanliness Code of 14/9: well below the standards of the equipment’s original manufacturers and distributors.
Removes particles down to 1 micron (3 absolute), remove 99.95% of all water, greatly decreasing machine wear and prolonging oil life.
Optional Micromag to remove fine ferrous material to submicron and control bacteria.
Clean any mineral, synthetic oil, hydraulic, gear, transmission, turbine and cutting fluids or diesel fuels.

Optional Extra Addons for Filter Carts:

Micromag Option

The Micromag is a powerful 9000 gauss rare earth magnet.

This is an effective pre-filter, removing relatively large particles of magnetic and ferrous material.

This magnet can be installed as an optional extra on all our filter cart range. Due to its convenient mount and clear filter housing, fluid can be seen and condition can be reviewed. This is also an excellent tool when commissioning your filter rig to ensure stable flow conditions.

Compact, high-performance filter, rapid return on investment

Manual clean magnetic filter can be easily installed on new or existing equipment
High-intensity magnetic core and optimized fluid flow orientation
Removes almost 100% of ferrous contamination
High collection capacity relative to size
Non-block design
Rapid return on investment, low-cost option

Models of Micromag:

Micromag M5
Micromag M10
Micromag M20

How Micromag Works

Contaminated fluid enters the inlet port where flow
is equally split via tapered radial flow channels which
lowers the flow velocity ready for the fluid to be
filtered.

It then passes up the outside of the centrally mounted
‘Rare Earth’ magnetic core where contamination
particles are attracted and retained.

The magnetic flux circuit geometry ensures a controlled
build up of contamination so the filter can never block.

Filtered fluid then flows through slots at the top of the
core then down and through the center of the core,
exiting through the outlet port.

ICM 2.0 Particle Counter

This particle counter addon can be added onto any one of the Kleenoil Filter Carts but it must be specified when ordering the filter cart as bracing and wiring need to be built into the machine to support the addon.

The ICM 2.0 automatically measures and displays particulate contamination, moisture and temperature levels in various hydraulic fluids. It is designed specifically to be mounted directly to systems, where ongoing measurement or analysis is required, and where space and costs are limited. The ICM can be used as a standalone product or can be controlled by external PC, PLC or the ICM: RDU (Remote Display Unit with 3m control supplied as standard).

Calibrated to relevant ISO standards
Various communication protocols as standard RS485, MODBUS, CANBUS, 4-20mA analogue output as standard
Various reporting formats included
Moisture and temperature sensing (fluid dependent).
Data logging and 4000 test result memory
Multicolor indicators via LCD (K versions) and LED with output alarm signals as standard
Robust die cast aluminium construction
Maximum operating pressure to 420 bar
Environmental protection IP65/67 versatile
Secondary connector to allow the simultaneous control/ download of results during operation
Option available to download directly all results onto a USB stick.

Flow Rate: It is impossible to state an exact flow rate because it is dependent upon many factors such as viscosity, temperature, and a degree of contamination of fluid, and also pump pressure and degree of contamination of cartridges. As an approximate guide, the flow of 32 sec. Hydraulic oil at room temperature through new Kleenoil Filter Cartridges will be:

2CART-HIGHSPEED	Using AW-32(SAE 10W) cleans 800-1000 litres (200-275 gallons) per hour Using Diesel Fuel cleans 1100-1400 litres (275-350 gallons) per hour
4CART-HIGHSPEED	Using AW-32(SAE 10W) cleans 1200-1500 litres (300-400 gallons) per hour Using Diesel Fuel cleans 1300-1800litres (400-600 gallons) per hour
2CART-HIGHSPEED-MAG	Using AW-32(SAE 10W) cleans 800-1000 litres (200-275 gallons) per hour Using Diesel Fuel cleans 1100-1400 litres (275-350 gallons) per hour
4CART-HIGHSPEED-MAG	Using AW-32(SAE 10W) cleans 1200-1500 litres (300-400 gallons) per hour Using Diesel Fuel cleans 1300-1800litres (400-600 gallons) per hour